No. 116 (2026)

Статті

• Meditations on Equi-Strength, Equi-Stability, Equi-Reliability and Optimal Design

  Anatolii Perelmuter, Isaac Elishakoff

  3-12

  • PDF

• Comparative analysis of the use of Matlab tools for optimizing parameters with constraints

  Petro Lizunov, Olga Pogorelova, Tetiana Postnikova

  13-25

  • PDF

• Non-stationary bending vibration of a helicopter rotor blade under distributed aerodynamic load. Part 2. Forced vibrations of the blade

  Petro Lukianov, Andrii Lukan, Oleksii Shkryl

  26-34

  • PDF

• A protective shelter sheet steel structural behaviour numerical simulation when hit by a fragment from an impacting UAV

  Serhii Bilyk, Mykhailo Daurov, Artem Bilyk, Oleh Pavlovskyi

  35-40

  • PDF (Українська)

• Assessment of the effect of the fluctuating component of wind pressure on a lattice telecommunication tower

  Yurii Maksymiuk, Yevhen Tsyupyn, Olha Bashynska, Andrii Kozak

  41-49

  • PDF

• Features of Finite Element Modeling for Buckling Analysis of Elastic Shells with Inhomogeneous Structure under Thermomechanical Loads

  Olga Krivenko, Petro Lizunov, Oleksandr Kalashnikov

  50-66

  • PDF

• Study of the Propagation of Explosive and Impulsive Loads in Soil Environments

  Ivan Solodei, Cherman Zatyliuk

  67-74

  • PDF (Українська)

• Zonal method for contact interaction modeling in the semi-analytical finite element method

  Serhii Pyskunov, Serhii Mitsyuk, Dmytro Mitsyuk

  75-83

  • PDF

• Using the finite element method to determine the possibility of application and improvement of organizational and technological solutions for localization of destroyments caused by influences not foreseeed during design

  Oleksii Tugai, Andrii Kozak, Denys Khokhlin, Mykhailo Bozhynskyi

  84-96

  • PDF (Українська)

• Methodology for creating a mobile crushing plant taking into account the stress-deformed state of its structural elements

  Yevhen Mishchuk, Pawel Ciężkowski, Ievgenii Gorbatyuk, Dmytro Mishchuk

  97-108

  • PDF

• Research of technology for creating external waterproofing by injection of underground structure

  Oleksandr Molodid, Ruslana Plokhuta, Ivan Musiiaka, Maksym Omelchenko, Yevheniia Novak

  109-119

  • PDF

• Construction of 3D models for additive manufacturing based on three-periodic surfaces of the Fourier polynomia

  Nataliia Ausheva, Iuliia Sydorenko, Oleksandr Kaleniuk, Piet Van den Ecker, Oleh Gerashchenko

  120-132

  • PDF

• Features of the calculation of a flat sheet as a membrane element of a combined retaining wall

  Andrii Mozghovyi, Karina Spirande, Oleksandr Samorodov, Oleksandr Spirande

  133-159

  • PDF (Українська)

• Method for determining the penetrating ability of small arms bullets into protective equipment

  Anatolii Kovtun, Volodymyr Tabunenko, Serhii Nesterenko, Oleh Salnyk, Andrii Nedashkovsky

  160-171

  • PDF (Українська)

• Aprobation of a methodology for modeling progressive collapse using the example of a real-world accidental impact on a construction site

  Maksym Vabishchevich, Ihor Fesun, Andrii Raschenko

  172-180

  • PDF (Українська)

• Application of additive technologies in the construction of energy-efficient buildings with a positive energy balance

  Ivan Nazarenko, Ivan Pereginets, Mykola Savytskyi, Iryna Bernik, Oleksandr Savytskyi

  181-192

  • PDF

• Research of the influence of defects on the dynamic behavior of layered spherical shell structures

  Kostiantyn Kotenko, Mykola Klymenko, Serhii Orlenko

  193-206

  • PDF (Українська)

• Use of the Green's function method in the hyperbolic heat conduction theory and non-Fourier analysis of non-stationary thermoelastic fields (moving) deformed media/bodies and composite materials

  Iurii Chovniuk, Oleksii Priymachenko, Petro Cherednichenko, Nataliia Shudra

  207-219

  • PDF (Українська)

• Geometric modeling of solar radiation zones on curved airport terminals coverings during their reconstruction

  Gryhorii Ivanchenko, Galina Getun, Vitalii Zapryvoda, Iryna Bezklubenko, Andrii Zapryvoda

  220-228

  • PDF (Українська)

• Underestimation of Vertical Stresses in Soil Foundations Using Analytical Methods: Numerical Substantiation Considering Nonlinear Base Behavior

  Ostap Kashoida, Veronika Zhuk

  229-242

  • PDF

• Structural design under blast loading: from simplified models to advanced dynamic analysis

  Denys Mykhailovskyi, Volodymyr Kotsiuruba, Ihor Skliarov, Oleh Komar

  243-250

  • PDF

• Analysis of the optimal speed-based start-up mode of the tower crane swing mechanism under control limitations

  Viacheslav Loveikin, Yurii Romasevych, Kostiantyn Pochka, Oleksii Stekhno, Anastasiia Liashko

  251-262

  • PDF

• An innovative methodology for restoration and strengthening of reinforced concrete structures via concrete overlay and its CAD-implementation during repairs and reconstruction

  Dmytro Prusov, Andrii Lakshtanov, Mariia Rokohon

  263-274

  • PDF

• Kinematic synthesis of a combined lambda-type mechanism

  Viacheslav Pasika, Yuriy Ozymok, Yurii Kapral, Ihor Ben

  275-282

  • PDF (Українська)

• Research of the stress-deformed state of a protective shell structure upon impact of shell fragments

  Olga Lukianchenko, Olena Kostina, Oksana Palii

  283-290

  • PDF (Українська)

• Features of the distribution of stresses in the soil base of piles depending on the method of their placement in the plan

  Oleh Malyshev, Tetiana Dyptan

  291-298

  • PDF (Українська)

• Research on the influence of soil base stiffness reduction on the stress-strain state of the “base-structure” system

  Gherman Zatyliuk, Bohdan Bartkiv, Valentyn Nedin, Andrii Lysovenko

  299-317

  • PDF (Українська)

• Analysis of the stress-strain state of a reinforced concrete collector considering soil-structure interaction

  Oleksandr Gavryliuk, Veronika Zhuk

  318-326

  • PDF (Українська)

• Optimization of bidirectional data exchange processes between BIM-platforms and structural analysis software using visual programming tools

  Ivan Solodei, Vasyl Pavlenko

  327-335

  • PDF (Українська)

• Deep Well Trajectory Optimization Using the Lagrange problem

  Olena Andrusenko, Viktor Gaidaichuk, Kostiantyn Kotenko

  336-343

  • PDF (Українська)

• Fundamental analysis of the dynamics of discrete-continuous rotary systems of tracked machines with mechatronic control systems

  Yurii Chovniuk, Oleksii Priymachenko, Petro Cherednichenko, Nataliia Shudra

  344-359

  • PDF (Українська)

• Methodical aspects of application of visual aids when teaching the «Kinematic Analysis» module to engineering students

  Iryna Kara, Viktor Andriievskyi

  360-365

  • PDF

• Survivability assessment of shell structures under blast loads

  Yevhenii Yehorov, Oleksandr Kucherenko, Yuliia Ivchenko

  366-372

  • PDF (Українська)

• Some aspects of the restoration of transport infrastructure facilities

  Valentyn Nedin, Alina Lizunova

  373-382

  • PDF

• Flexible architectural and structural prefabricated frame system of residential buildings of the "RAPL" type

  Vasyl Bachynskyi, Liudmyla Bachynska

  383-392

  • PDF (Українська)

• Dynamic analysis of the slewing mechanism of a jib crane with a payload suspension in the form of a double pendulum

  Viacheslav Loveikin, Yuriy Romasevych, Kostiantyn Pochka, Ivan Kadykalo, Oleksii Stekhno

  393-405

  • PDF

• Influence of non-homogeneity parameters on the stress state of long non-thin cylindrical elliptical shells

  Liliia Rozhok, Lesia Kruk, Halyna Isaienko

  406-413

  • PDF (Українська)

• Assessment of the stress-strain state of a retaining wall taking into account its spatial rigidity in dense urban development conditions

  Viktor Nosenko, Artur Malaman

  414-424

  • PDF (Українська)

• A conceptual model for quality assessment of frame strengthening during building reconstruction

  Iryna Rudnieva

  425-432

  • PDF

• Semi-analytical finite element method for solving three-dimensional problems of thermo-visco-elasto-plasticity of prismatic bodies with material damage consideration

  Viktor Andriievskyi, Iryna Kara

  433-438

  • PDF

• Physics-Informed Neural Networks for Analysis of Spatial Beam Structures: A Kinematic Decomposition Approach

  Serhii Getun

  439-449

  • PDF

• Modelling of momentless thin-walled shells of revolution by vector rational parametric curves of the second degree

  Mykola Tereschuk, Ghennadii Virchenko, Volodymyr Savenko, Tetiana Honcharenko

  450-459

  • PDF (Українська)

• Multi-layeredspatial–hierarchical model of protected zones in buildings and structures

  Tetiana Zhydkova

  460-469

  • PDF (Українська)

• Optimal design of the stability of a minimum surface shell on a rectangular contour with accounting for geometric nonlinearity under thermo-stress loading

  Oleksandr Koshevyi, Serhii Zavatskyi

  470-480

  • PDF (Українська)

• Research on the impact of diesel generator fire on building structures of enclosed spaces

  Yaroslav Ballo, Vadym Nizhnyk, Roman Veselivskyi, Roman Yakovchuk, Roman Lozynskyi

  481-490

  • PDF

• Сomparative analysis of methods for determining the parameters of small-sized vibration installations

  Yurii Maksymiuk, Mykola Kuzminets, Artur Onyshchenko, Ivan Martyniuk, Oleksandr Maksymiuk

  491-498

  • PDF

• Theoretical and experimental bases for ensuring thermal and acoustic resistance of structural elements of buildings and shielding of electromagnetic radiation emission

  Nataliia Burdeina, Oles Lastivka, Gryhorii Krasnianskyi, Volodymyr Skochko, Kyrylo Nikolaiev

  499-510

  • PDF

• Analysis of the stress-strain state of a cylindrical multilayer shell of a protective structure under explosive loads

  Liudmyla Hryhorieva, Ilias Damnati

  511-520

  • PDF

• Research on the influence of rare-earth and alkaline-earth micro-additions on the visco-plastic properties and brittle strength of cold-resistant low-alloy steel

  Valerii Makarenko, Volodymyr Hots, Oles Lastivka, Oleksandr Tomin

  521-530

  • PDF (Українська)