Research of the interconnections of the "structure - technology - mechanized equipment" system in the construction of frame buildings
DOI:
https://doi.org/10.32347/2410-2547.2024.113.337-344Keywords:
structural calculation, frame buildings, technology, mechanized equipment, lifting module, stress-strain state, geodetic controlAbstract
The article was developed and implemented for calculation models of the frame building and the lifting module bu using computing complex Autodesk Inventor. The dimensions and number of models elements allow to correctly investigate the technical structure. The basic scheme of connections in determining the structural scheme of the building, the method of its construction, and technical means of implementation is considered. Actuality of this work is the need for qualitative analysis of interrelated solutions in construction when using new construction technologies and modernization of mechanized support for their implementation.
Modern approaches to the formation of the structure of the building frame are analyzed. The main propouse is based on using of lifting assembly modules to reduce the specific share of the use of heavy crane equipment at the construction site.
Approaches to the formation of a system for monitoring the construction process, in particular the installation of the covering, were also considered.
Based on the results of the research, technical solutions are proposed to support the process of installing the building covering, which take into account the structural features of the building and are formed taking into account the functional features of the construction technological process.
References
Tonkacheev H. Molodid O., Tonkacheev V. Shandra O. (2024) Innovation Technology of the frame construction. Study guide - K.: KNUCA, 2024. P. 316. ( in Ukrainian )
Chernenko V.K., Osypov O.F., Tonkacheev H.M., Romanushko E.H. (2011) Technology of installation of building structures Navch . pos . – K. - 368 p .
Sukach M.K., Ryzhakova L.M., Chernyshev D.O., Ivakhnenko I.S. (2020) Fundamentals of technology transfer : a textbook . 318. ISBN 978-617-7748-90-7 ( in Ukrainian )
Khubka V.(1987) Theory tekhnycheskykh system: Per. s nem .- M.: Myr , 1987. – 208 p.
Garnets V., Shalenko V., Maslyuk A. (2018) Methodology of creating machines . Practical work and tasks for the course work : teaching manual . 100. ( in Ukrainian )
Bunyn MV, Nychke VV, Bohomolov AA (1987) Efficiency and potential of construction machines . 160. ( in Russian )
Kravets S. (1990) Basics of technical creativity in construction and reclamation engineering . 160. ( in Russian )
Khmara LA, Shpylov AS, Butenko AA (2009) Technological equipment for the production of building materials . Teacher Allowance . 320. ( in Russian )
Blokhin VS, Malich MH (2006) Basic parameters of technological machines .. Ch2. 400. ( in Ukrainian )
Hennadii Tonkacheiev; Oleksandr Ignatenko; Volodymyr Rashkivskyi; Natalia Zozulia; Kateryna Nosach; Yuri Zaiets (2024). Development of structural and technological solutions for the construction of large-span coatings by craneless methods. Edelweiss Applied Science and Technology. Vol.8, No. 6, 582-590. https://doi.org/10.55214/25768484.v8i6.2130
Tonkacheiev H., Ignatenko O., Rashkivskyi V., Dubovyk I., Tryhub A., Sobko Yu. (2024). Development of the technology of crane-less lifting of long-span reinforced concrete and metal coatings. AD ALTA: Journal of Interdisciplinary Research (14/01-XL.), 271–275. https://doi.org/10.33543/j.140140.271275
Rashkivskyi V., Demianenko R. (2023) Study of the adequacy of the BIM model in the survey of damaged building objects. 2023 IEEE International Conference on Smart Information Systems and Technologies: Conference Proceedings (May 4–6, 2023, Astana, Kazakhstan), 314–317. https://doi.org/10.1109/SIST58284.2023.10223588
DBN V.2.6-198:2014 "Steel structures. Design standards".(in Ukrainian )
DBN V.1.2-2:2006 "Loads and impacts. Design norms". (in Ukrainian)
DBN V. 1.2-2-2006 System for ensuring the reliability and safety of construction objects. Loads and influences. Design norms. (in Ukrainian)
DSTU B V.1.2-3:2006 - Deflections and displacements of design requirements. ( in Ukrainian )
Ivashko Y.; Dmytrenko A.; Molodid O.; Ivashko O.; Molochko, V.; Belinskyi S.; Bigaj P. (2024) The destruction of the established urban environment of borodianka and irpen as a result of the russian-ukrainian war International Journal Of Conservation Science, Volume 15 Issue 2 Page 785-800 DOI 10.36868/IJCS.2024.02.03
Molodid, O., Skochko, V., Bogdan, S., Wysznacki, K., Borowczyk, J. (2024) Certain aspects of research work in the restoration of the kyiv velodrome International Journal of Conservation Science, 2024, 15(3), pp. 1389–1406 DOI 10.36868/IJCS.2024.03.15
Roman Shults, Khaini-Kamal Kassymkanova, Shugyla Burlibayeva, Daria Skopinova, Roman Demianenko, Yurii Medvedskyi. (2020) UAV Monitoring of Excavation Works. International Conference “Environmental Engineering”, 11th International Conference “Environmental Engineering”. С. 1-6 DOI: 10.3846/enviro.2020.696.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
