Control of the strength properties of welded connections in the manufacture of building steel structures

Authors

  • Ivan Datsenko The National Defense University of Ukraine named after Ivan Chernyakhovskyi, Ukraine
  • Volodymyr Kotsiuruba The National Defense University of Ukraine named after Ivan Chernyakhovskyi, Ukraine https://orcid.org/0000-0001-6565-9576
  • Volodymyr Mirnenko The National Defense University of Ukraine named after Ivan Chernyakhovskyi, Ukraine https://orcid.org/0000-0002-7484-1035
  • Ivan Tkach The National Defense University of Ukraine named after Ivan Chernyakhovskyi, Ukraine https://orcid.org/0000-0001-5547-6303
  • Stanislav Tryhubenko Central research institute of weapons and military equipment of the Armed Forces of Ukraine, Ukraine
  • Mykhailo Shyshanov Central research institute of weapons and military equipment of the Armed Forces of Ukraine, Ukraine https://orcid.org/0000-0002-7121-3666

DOI:

https://doi.org/10.32347/2410-2547.2019.102.150-158

Keywords:

welding, self-shielded flux-cored wire, arc, stress, current strength, wire feed, welded joint, heat-affected zone, metal structure, strength

Abstract

As is well known in construction, mechanized welding with self-shielded cored wire has found wide application. In this case, welding methods that are used do not always allow to realize the potential that is laid in this group of welding materials. In addition, modern welding methods are characterized by a large heat input in parts and welded joints. In this regard, in the article ways to improve the technological capabilities of mechanized welding with flux-cored wire by introducing modulated current into the production of building steel structures are discussed.

Author Biographies

Ivan Datsenko, The National Defense University of Ukraine named after Ivan Chernyakhovskyi

Candidate of technical sciences, Doctoral student

Volodymyr Kotsiuruba, The National Defense University of Ukraine named after Ivan Chernyakhovskyi

Doctor of technical sciences, associate professor, professor of operative and military support department

Volodymyr Mirnenko, The National Defense University of Ukraine named after Ivan Chernyakhovskyi

Doctor of Technical Sciences, Professor, Head of the Air Force Logistics Department

Ivan Tkach, The National Defense University of Ukraine named after Ivan Chernyakhovskyi

Doctor of Economics, Associate Professor, Head of the Department of Economics and Financial Support

Stanislav Tryhubenko, Central research institute of weapons and military equipment of the Armed Forces of Ukraine

Doctor of Military Sciences, Senior Researcher

Mykhailo Shyshanov, Central research institute of weapons and military equipment of the Armed Forces of Ukraine

Doctor of Technical Sciences, Professor, Senior Researcher

References

Wagner F.A. Oborudovanie i sposoby svarki pul'siruyushchej dugoj (Equipment and methods of pulsed arc welding). - M.: Energiya, 1980. - 120 p. (in Russian)

Voropai N.M. Parametry rezhimov i tekhnologicheskie vozmozhnosti dugovoj svarki s impul'snoj podachej svarochnoj provoloki (Parameters of modes and technological capabilities of arc welding with a pulsed feed of welding wire) // NM. Voropay. Avtomaticheskaya svarka (Automatic welding). - 1966. - № 10. - P. 3 - 9. (in Russian)

Voropay N.M. Principy postroeniya ustrojstv dlya impul'snoj podachi svarochnoj provoloki (Principles of construction of devices for pulse supply of welding wire) // N.M. Voropay. Avtomaticheskaya svarka (Automatic welding). - 1998. - № 8. - P.19 - 25. (in Russian)

Voropay N.M. Elektromagnitnye mekhanizmy impul'snoj podachi svarochnoj provoloki (Electromagnetic mechanisms of the pulsed feed of welding wire) // NM. Voropay, O.N. Saveliev, S.S. Semergeev. Avtomaticheskaya svarka (Automatic welding). - 1980. - №5 45-54. (in Russian)

Erokhin A.A. Osnovy svarki plavleniem (Fundamentals of fusion welding). M.: Mashinostroenie, 1973. - 448 p. (in Russian)

Petrov G.L., Tumarev A.S. Teoriya svarochnyh processov (Theory of welding processes). - M.: Vysshaya shkola, 1977. - 391 p. (in Russian)

Bagryansky K.V., Dobrotina Z.V., Khrenov K.K. Teoriya svarochnyh processov (Theory of welding processes). - K.: Vishchaya shkola, 1976. - 424 p. (in Russian)

Kasprzhak G.M., Shchitova V.M. Strukturnaya klassifikaciya i sravnitel'nyj analiz sistem avtomaticheskogo regulirovaniya processa dugovoj svarki (Structural classification and comparative analysis of automatic control systems for the process of arc welding // Works of the section of electric welding of the Academy of Sciences of the USSR. - M.: Academizdat, 1953, Vol. 1, pp. 31-57. (in Russian)

Finney D. Vvedenie v teoriyu planirovaniya ehksperimentov (Introduction to the theory of experimental design). - M.: Nauka, 1970. 287 p. (in Russian)

Patent of Ukraine Attachment for filing a dart / І.P. Datsenko, V.V. Yablokov, V.M. Osaulenko, M.V. Gribachov, OL Kudritsky, V.V. Kuptsiv // Declaration patent on wines No 57596A, 2003. - 6 p. (in Ukrainian)

Downloads

Published

2019-07-12

Issue

Section

Статті